Disclosure
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
I was looking for a pair of inline skates that could handle serious speed training, not just casual cruising. I tested the Pasendi Professional Carbon Fiber Speed Skates and was immediately impressed by the stiff carbon fiber shell and the large 110mm wheels.
These are definitely for experienced skaters focused on performance. The trade-off for that speed is a higher learning curve and less forgiveness than recreational skates. If you’re ready to push your limits, these skates have some compelling features worth a closer look.
- Carbon Fibre Shoe Shell, Shoelaces and Buckles Reinforce,Micro Adjustable...
- Inline Speed Skate Shoes, 4x110mm Aluminum Frame,Length 13.2",
- With 110mm Wheels,Hardness 85A, Have Pink and Blue
What Stands Out — Key Features
- Carbon Fiber Shell: This is the star of the show. The shell is incredibly stiff, which I felt gave me more power transfer with every push. It’s a professional-level material that justifies the “speed skate” name.
- 110mm Wheels & Frame: The four 110mm wheels on a 13.2-inch aluminum frame are built for rolling fast and smooth over pavement. I noticed they maintain speed much better than smaller wheels, but they also raise your center of gravity.
- Dual Closure System: You get a traditional lace-up for a snug fit around the foot, plus a micro-adjustable ratchet buckle over the ankle. I found this combo really locks your heel in place, which is crucial for control at high speeds.
- ABEC-9 Bearings: The bearings are a key part of the speed equation. These pink and blue chromium steel ABEC-9 bearings spin very freely with minimal friction, helping you get the most out of each stride.
- 85A Wheel Hardness: The polyurethane wheels have an 85A durometer rating. This is a good balance for speed skates, offering decent grip while being hard enough for efficient rolling on smooth surfaces.
- Unisex Adult Sizing: The skates are marketed for both men and women, with a size range from US6/EU38 all the way up to US13/EU46. It’s important to check their size chart carefully, as fit is critical.
- Substantial Build: Each skate weighs 5.7 pounds. You feel that solidity on your feet, which contributes to a stable, planted feel when you’re moving, though it adds to the overall effort.
- Packaged Ready: The whole set arrives in a box measuring 17.24 x 13.54 x 6.26 inches and weighs about 8.1 pounds total. Everything you need is included, so you can assemble and get rolling.
Full Specifications
Pros & Cons — The Honest Take
✅ What I Like
- The carbon fiber shell is incredibly stiff, giving you direct power transfer for maximum speed.
- The 4x110mm wheel setup rolls fast and smooth, maintaining momentum better than smaller wheels.
- The dual lace and ratchet buckle system provides a secure, locked-in fit around the ankle.
- ABEC-9 bearings spin with very little friction, which you can feel on every push.
- The build feels solid and durable, with a total package weight of 3.69 kilograms.
❌ What Could Be Better
- At 5.7 pounds per skate, they are noticeably heavy, which can be tiring over long sessions.
- The high frame and large wheels create a steep learning curve; they are not beginner-friendly.
- The fit runs on the narrower side, so people with wide feet should check sizing carefully.
For an experienced skater chasing speed, the pros here are exactly what you need. The cons are mostly about the trade-offs for that performance, so just know what you’re signing up for.
⚖️ How Does It Compare?
I compared the Pasendi Professional Carbon Fiber Speed Skates to two other popular options to see where it fits. I picked these because they represent different trade-offs in the speed skate category, from similar builds to more recreational choices.
- Carbon Fibre Shoe Shell:Shoelaces and Buckles Reinforce,Micro Adjustable...
- Frame:Inline Speed Skate Shoes,，Upgraded Aluminum Alloy Bracket: lighter...
- Wheels:110MM,Dual Hardness Speed Skates Wheels
🔵 Alternative 1: Pasendi Carbon Fiber Inline
Best for: Skaters who want a similar carbon fiber performance boot but with a potentially different wheel or frame setup.
Key specs: Carbon fiber shell, check listing for wheel size, likely ABEC-9 bearings, unisex sizing.
Where it beats the main product: It might offer a slightly different fit profile or component configuration that some skaters prefer.
Where it falls short: The exact specs like the 110mm wheels and 13.2″ frame on the main model are a proven speed setup.
- 【Bold-line Freedom Skates】Whether it's urban living, fitness needs,...
- 【HIGH SPEED 110MM WHEELS】The adults roller blades's is equipped with 3...
- 【Durable Aluminum Alloy Frame】Aluminum alloy frame men's and women's...
⚪ Alternative 2: Obensky Adults Roller Blades
Best for: Casual skaters or beginners who want a more forgiving, recreational-focused ride.
Key specs: Check listing for wheel size, likely smaller than 110mm, softer boot, often more affordable.
Where it beats the main product: It will be much easier to learn on, lighter, and better for casual fitness or fun.
Where it falls short: It lacks the high-performance carbon fiber stiffness and large 110mm wheels needed for serious speed.
If you’re absolutely certain you want a dedicated speed machine with a carbon fiber boot and 110mm wheels, the main Pasendi model is the clear pick. I’d only suggest the other Pasendi model if you’re curious about a slightly different configuration from the same brand. Choose the Obensky skates only if you’re a beginner or your priority is casual skating over pure speed.
How It Actually Performs
Speed & Power Transfer
The carbon fiber shell is the real deal. It’s incredibly stiff, and I felt almost all my leg power go directly into forward motion. The 110mm wheels and ABEC-9 bearings let you build and hold speed with impressive efficiency. This setup is noticeably faster than recreational skates with smaller wheels, but that stiffness means you feel every bump in the pavement.
Stability & Control
With a 13.2-inch frame and a high ride height from the large wheels, these skates demand good ankle strength. The dual lace and ratchet buckle system is crucial here—it locks your heel down solidly. At 5.7 pounds per skate, they feel planted and stable at speed, but that weight makes quick, sharp maneuvers feel more deliberate than nimble.
Comfort & Fit
The carbon fiber doesn’t break in like a soft boot, so getting the right size is non-negotiable. I found the fit to be on the narrower side. The 85A hardness wheels offer a decent compromise, absorbing some vibration but still feeling firm for speed. For long distances, the unyielding nature of the shell can become fatiguing if you’re not used to it.
Durability & Build
The construction feels substantial. The aluminum frame is solid, and the overall package weight of 3.69 kilograms speaks to the materials used. After several sessions, the buckles and stitching held up well. While they are built for expert use, the polyurethane wheels will wear down with aggressive outdoor skating, which is normal for any performance skate.
Who Should Buy This Generator?
Not every skate is right for every skater. Based on my time with them, here’s who will get the most out of these and who should probably keep looking.
✅ This Is a Great Fit If You…
- You’re an experienced inline skater focused on fitness, marathon training, or pure speed.
- You understand and want the direct power transfer that comes from a stiff carbon fiber shell.
- You’re ready to handle the higher ride and weight (5.7 lbs each) of a 4x110mm wheel setup.
- You need a secure, locked-in fit and appreciate the combination of laces and a ratchet buckle.
❌ You Might Want to Look Elsewhere If…
- You’re a beginner or intermediate skater. The learning curve on these is steep and unforgiving.
- You prioritize casual recreation, tricks, or urban skating over straight-line speed.
- You have very wide feet, as the carbon fiber boot doesn’t offer much flexibility for a wide fit.
My top recommendation is for the dedicated speed skater who views their gear as performance equipment. The Pasendi Professional Carbon Fiber Speed Skates deliver exactly what that skater needs: efficiency, response, and a build meant for serious miles.
- Carbon Fibre Shoe Shell, Shoelaces and Buckles Reinforce,Micro Adjustable...
- Inline Speed Skate Shoes, 4x110mm Aluminum Frame,Length 13.2",
- With 110mm Wheels,Hardness 85A, Have Pink and Blue
Common Issues & Fixes
Even great skates can have little quirks. Here are a few things I ran into or heard about, and how to handle them.
Wheels Not Spinning Freely
The problem: One or more wheels feel stiff or don’t spin smoothly after assembly.
My fix: First, check that the axle nuts aren’t overtightened. They should be snug but not crushing the bearings. If that’s okay, the bearings might need a break-in period—a few hard pushes usually gets them rolling.
Buckle Slipping or Not Holding
The problem: The micro-adjustable ratchet buckle loosens during a skate or doesn’t click securely.
My fix: Make sure the buckle’s teeth are fully engaged with the strap. Sometimes debris gets in there. Clean it out with a brush. If it’s still slipping, the buckle mechanism itself might be defective and need a replacement.
Foot Pain or Numbness
The problem: Your foot hurts or goes numb, especially in the arch or forefoot, after skating for a while.
My fix: This is often a fit or lacing issue. The carbon shell won’t stretch. Try different lacing patterns to relieve pressure points, and ensure you’re not cranking the laces and buckle too tight over the top of your foot.
Excessive Vibration
The problem: The ride feels extremely harsh and shaky, even on decent pavement.
My fix: Remember, you have 85A hardness wheels designed for speed, not comfort. Softer wheels (like 78A-82A) will absorb more vibration but might roll slower. Also, check that all your wheel axles are tight to eliminate any extra wobble.
Warranty & Support
The product listing mentions free returns on some sizes, which is good to see. For specific warranty details, you’ll need to check the information provided by PASENDI on the Amazon product page, as manufacturer policies can vary. I recommend contacting the seller through Amazon if you have a defect right out of the box.
- Carbon Fibre Shoe Shell, Shoelaces and Buckles Reinforce,Micro Adjustable...
- Inline Speed Skate Shoes, 4x110mm Aluminum Frame,Length 13.2",
- With 110mm Wheels,Hardness 85A, Have Pink and Blue
Frequently Asked Questions
Are these skates good for beginners?
No, I would not recommend them for beginners at all. The product data lists the skill level as “Expert” for a reason. The carbon fiber boot is unforgiving, the 110mm wheels make you ride high, and the 5.7-pound weight per skate requires strong technique. A beginner would struggle with control and likely get frustrated.
What size should I order?
You need to measure your foot and use the Pasendi size chart carefully. The skates come in unisex sizes from US6/EU38 to US13/EU46. Based on my experience, they fit on the narrower side. If you’re between sizes or have wide feet, sizing up might be necessary for comfort.
Can I replace the wheels and bearings?
Yes, absolutely. The wheels are standard 110mm with an 85A hardness, and the bearings are ABEC-9. Both are common sizes in speed skating. You can swap them out when they wear down or if you want to try different wheel hardness for different surfaces. The aluminum frame uses standard mounting.
How do they handle rough pavement or outdoor trails?
They are built for speed on smooth surfaces. The 85A wheels are hard and the stiff frame transmits a lot of vibration. They can handle decent bike paths, but rough asphalt or cracks will feel very jarring. For truly rough terrain, a skate with smaller, softer wheels would be a better choice.
Are they comfortable for long-distance skating?
This depends on your skill level and fit. For a trained skater with a proper fit, the efficient roll of the 110mm wheels is great for covering long distances with less effort. However, the rigid carbon fiber offers little flex, so any pressure points from an imperfect fit will become painful over many miles.
What’s included in the box?
You get the complete pair of skates, fully assembled aside from maybe attaching the wheels. The whole package weighs 3.69 kilograms and the box dimensions are 17.24 x 13.54 x 6.26 inches. You shouldn’t need any special tools to get started, just a skate key for axle adjustments is typically included.
My Final Verdict
The Pasendi Professional Carbon Fiber Speed Skates deliver exactly what they promise: a stiff, responsive platform built for speed. The carbon fiber shell and 110mm wheels with ABEC-9 bearings create an efficient, fast ride that recreational skates can’t match. I confidently recommend them to experienced skaters focused on fitness or marathon training. I would not recommend them to beginners or anyone looking for a casual, comfortable skate.
The main limitation is the trade-off for that performance: they are heavy at 5.7 pounds each and unforgiving on rough ground. Despite that, if your goal is to go fast and you have the skill to handle them, this is a solid performance-oriented choice that gets the job done.
Ready to Check the Price?
If you’re an experienced skater ready for a serious speed setup with a carbon fiber boot, these Pasendi skates are definitely worth a closer look.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.